 |
|
 |
 |
|
|
|
|
|
|
|
 |
TEMPAD are used in microwave applications when signal level control is required. It is an absorptive temperature
compensating element which provides dissipation varying with the temperature. These devicies use at least two different
resistors (thermistor).
This is particularly useful for maintaing output of gain stage, mixer, power divider, amplifier and other signal processing
componsents over temperature. A signal passive device which provides temperature compensated attenuation can replace
the multiple components used.
|
|
 |
|
 |
|
 | |  |
 |
| 1. SANGSHIN ELECOM Co., LTD. |
|
| 2. Attenuation Value |
|
| CODE | | 3 | | 4 | | 5 | | 6 |
|
| Attenuation value | | 3dB | | 4dB | | 5dB | | 6dB |
|
|
|
| 3. Temperature Coefficient of Attenuation |
|
| 4. TEMPAD Type |
|
 | | |
 |
|
 | | |
- Amplifier
- Gain Stages
- Mixer
- Power Divider
- Other signal process |
|
 |
- Do not touch the sensing surface with bare hands and ensure no contact with adhesives,
solder, flux, oil, grease, organic
solvents(alcohol, acetone trichloroethylene, thinners, etc.)
and ionized material such as tap water.
- Do not directly exopse sensors to smoke from cigarettes, breath or steam.
- Do not apply stress to the elements as the ceramic substrate may crack and sensors may
not respond.
|
|
|
|
|
ADDRESS : 614-1 Wolhari, Shumyun, Yunkikun, Choong Chung Nam Do, Republic of KOREA
TEL : 82 - 41- 865 - 9000 ~ 5 FAX : 82 - 41 - 865 - 9229 |
|
